Procurement of 0701-182070110073 Xinjiang Changji Integrated Urban-Rural Infrastructure Demonstration Project Fukang City roads maintenance equipment and Ganhezi Town snow clearing equipment(14)

2019-02-15
【Buy Bidding Documents】
Clarify or change:Xinjiang Changji Integrated Urban-Rural Infrastructure Demonstration Project Financed by the Asian Development Bank
Fukang City roads maintenance equipment and Ganhezi Town snow clearing equipment
Eleventh Extension Notice

Contract No.: FK-G1
Invitation for Bid No.: 0701-182070110073

The project issued an Invitation for Bids on the supply of Fukang City roads maintenance equipment and Ganhezi Town snow clearing equipment on the official website of the ADB, www.chinabidding.com.cn, www.chinabidding.com and www.chinaitc.com.cn in March 12, 2018. The deadline for bid submission postponed for the first time to 9:30 a.m. on May 22, 2018, the second extension to June 21, 2018, the third extension to July 16, 2018, the fourth extension to August 15, 2018, the fifth extension to August 31, 2018, the sixth extension to September 30, 2018, the seventh extension to October 30, 2018, the eighth extension to November 29, 2018, the ninth extension to December 28, 2018, and the tenth extension to February 21, 2019. In order to give bidders more time to prepare bidding documents. The Eleventh extension of the deadline for bid submission postponed 18 days, which is postponed until March 11, 2019.

Bids must be delivered to the address below before 9:30 a.m. on March 11, 2019. Other time indicated in the bidding documents shall be postponed accordingly.

After receiving this document, the bidders should sign and seal the document and confirm receipt. After scanning, the bidders send it to the following e-mail.

Agent: China International Tendering Limited Company
Attn.: Mr. Zhang Zhuoyuan
Address: Conference Room, 3rd Floor of Genertec Plaza, No.90, Xisanhuan Zhonglu, Fengtai District, Beijing, The People's Republic of China
Tel: 0086-010-63348532/ 0086-13911198098
Fax: 0086-010-63373591
E-mail: zhangzhuoyuan@itc.genertec.com.cn
China International Tendering Co.,Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on2019-02-15
1、Bidding Conditions
Overview:Changji covers an area of 73,140 square kilometers (km), and is situated on a narrow piedmont plain between the Tianshan mountain ranges in the south and the Gurbantunggut Desert in the north. Changji surrounds Urumqi. Changji is located at the center of the Northern Tianshan economic zone, the Urumqi–Changji–Shihezi city cluster, and the Urumqi–Changji economic corridor. Changji's favorable location and its potential for economic growth encourages companies and industries to locate there, and has resulted in increased pressure on the environment and the inadequate, poorly performing urban infrastructure.The project will construct five roads of 7.2 km and rehabilitate four roads of 6.4 km with ancillary facilities, including utility pipes (water, wastewater, and heating), and the purchase of road maintenance equipment for the Fukang urban area. The roads will improve road connectivity and facilitate transfer of goods, while pipe installations will cover previously unserved areas and fill gaps in existing utility networks.
Source of Funds:Asian Development Bank Loan
Description of The Prepared Bidding Conditions:The Asian Development Bank has issued the Letter of No Objection to the Bidding Document.
2、Bidding Content
Bidding No:0701-182070110073
Project Name:Xinjiang Changji Integrated Urban-Rural Infrastructure Demonstration Project Fukang City roads maintenance equipment and Ganhezi Town snow clearing equipment
Place of Implementation:Xinjiang, Fukang
List of Products:
NO. Product Name Quantity Main Technical DataRemarks
1 Skid Steer Loader 5Set Engine power≥ 90hp;Displacement≥ 3.2L;Fuel Type / Emission Standard:Euro Ⅲ standard;Rated load≥1135kg;Maximum torque≥ 340/1400N.M;Climbing ability≥ 23 °;Bucket maximum lifting height≥ 4100mm;Maximum unloading height≥ 2600mm;Minimum ground clearance≥ 200mm;Axle base≥1300mm;Wheelbase≥1300mm;Fuel tank≥ 96.5L;Hydraulic tank≥ 22.4L;Maximum driving speed≥ 19.2km / h;Boundary dimensions (L × W × H) mm≥ 3000 × 1800 × 2000;Minimum turning radius (with bucket)≤ 2200mm;
2 Snow Removal Truck 12Set Engine Power≥249kW;Fuel Type/ Emission Standard: Diesel/The National Standard V;Total Quantity≥24500kg; Curb Weight≥16400g;Number of people in cab2;Driving Type6×4;Hydraulic tank volume≥100L;Maximum speed of operation≥75km/h;Maximum Gradient≥30%;Width of Roller Brushing Operation≥3600mm;Rolling Brush Diameter≥800mm;Rolling Brush Speed 220-250r/min;Angle of left and right swing of rolling brush≥30°;Displacement390ml;Hydraulic working flow76-190L/min;Rated operating pressure≥16MPa
3 Wheel Excavator 2Set Operation weight≥14000Kg;Bucket capacity≥0.5m3;Engine Power≥104/2000kW/r/min;Emission Standard:The National III Emission Standard;Displacement ≥4.5 L;Maximum Torque≥586N.m;Fuel Tank ≥250 L;Rated Flow≥2×160L/min;Working Pressure≥31.4/34.3MPa;Hydraulic tank≥ 135L;Rotation Speed≥ 12r/min;Bucket digging force≥95kN;Arm digging force≥72kN;Minimum turning radius≤6500mm;Walking Speed ≥11/30km/h;Climbing ability≥70%.
4 Watering Cart 2Set Engine Power≥155kW;Fuel Type/Emission Standard:Diesel/The National Standard V;Lift of low pressure water pump≥88 m;Washing width≥23m;Low pressure cleaning flow 600~800L/min;Low pressure flushing width≥24m;Range of water cannon≥36m;Volume of water tank ≥16000L;Maximum speed (full load)90km/h;Maximum climbing angle ≥20°;Braking distance (full load 30km/h) ≤10m;Minimum turning diameter≤18.4m
5 Motor Sweeper 5Set Engine Power ≥155kW;Auxiliary engine power≥118kw/2500r/min;Fuel Type/Emission Standard:Diesel/The National Standard V;Rated flow of high pressure water pump≥50L/min;Sweeping width≥3600mm;Sweeping speed≥3~15km/h;Cleaning Speed≥3~20km/h;Maximum cleaning capacity≥88000㎡/h;Discharge angle≥47°;Clear box volume ≥5.2m3;Trash volume≥8.5m3;Longest continuous operation time ≥120min;Maximum size of respirable particles ≥118mm;Sweeping Efficiency≥95%;Shape and Size(length×width×height) ≥8510×2490×3060mm;Total Quality ≥15800kg;Rated load mass ≥5680kg;Maximum Speed≥90km/h;Minimum turning diameter≤19m;Wheelbase 5000mm
6 Arm-hook Truck 8Set Shape and Size ≥5320×2010×2280(mm);Total Quality≥7360(Kg);Fuel Type/Emission Standard:Diesel/The National Standard V;Engine Power≥85KW;Maximum lifting force of arm hook arm ≥3000kg;Height of the arm hook arm center≥830mm;Guide width≥1020mm;Tipping angle of garbage bucket ≥50°;Discharge cycle time≤40s;Hoisting time ≤50s.
7 Snow Blower 1Set Snow cleaning capacity of snow lifting machine: ≥3500t/h;Snow Blowing distance: 5-40 m;Snow Blowing Width:≥2.5 m;Height of snow drum:≥3.5 m(hydraulic folding);Driving force:Mechanical 2 gear box;Hydraulic tank:≥110 L;Diesel fuel tank volume ≥530 L;Emission Standard: Euro III emission standard;Refrigeration system:water cooling cycle;Working Speed ≥40km/h; Engine Power≥318KW;Weight (with snow throwing head) ≥10000kg;Ground clearance (with snow throwing head)≥300mm;Tread≥1500mm;Wheelbase≥2315mm;Turning radius ≤4.5 m;Steering lock angle≥35°
8 Garbage Truck 2Set Shape and Size≥8100×2500×3350(mm);Total Quality≥16000(Kg);Fuel Type/Emission Standard :Diesel/The National Standard V;Wheelbase≥3950(mm);Engine Power≥136KW;Loading arm length≥2720mm;Working platform height≥1300mm;The maximum loading arm angle ≥123°;Total time of the garbage discharging and loading ≤55.7s;Cycle time of the garbage dump unloading ≤38.4s

3、Qualification Requirements For Bidder
Qualifications or Performance:(1) Minimum average annual turnover of CNY50 million calculated as total payments received by the Bidder for contracts completed or under execution over the last three (3) years (2014–2016). (2) Availability of or access to liquid assets, lines of credit, and other finances sufficient to meet cash flow requirement which is CNY12 million. (3) Successful completion as main supplier within the last 3 years (2015–2017), of at least 2 contracts related to road maintenance equipment each valued at CNY20 million with nature and complexity similar to the scope of supply. Bidders should have ISO9000 Quality Management System Certificate. Documentary evidence shall be provided including but not limited to, copies of notification of award, signed supply contract, copy of required certificate and any other reference information from its previous clients, etc. (4) The Bidder shall demonstrate that the key equipment (including Skid Steer Loader, Snow Removal Truck, Wheel excavator, Watering Cart, Sweeper, Arm-hook Truck, Snow Blower, Garbage truck) of similar capacity has been in production for at least five (5) years. For each type of above mentioned equipment, a minimum of five (5) units of similar capacity have been sold and have been operating satisfactorily for at least three (3) years. Manufacturers for each type of above mentioned equipment should have ISO9000 Quality Management System Certificate.
Joint Bids:Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2018-03-12
Ending of Selling Bidding Documents:2018-07-16
Sell bidding?doc?online?or?not:No
To Obtain::On-site Purchase
Place:Room 901 Genertec Plaza, No. 90, Xisanhuan Zhonglu, Beijing, China
Price of Bidding Documents:¥¥1500/$250/$250
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2019-03-11 09:30
Place of Bid:Meeting room, 3rd Floor, Genertec Plaza, No. 90, Xisanhuan Zhonglu, Beijing, China
Place of Bid Opening:Meeting room, 3rd Floor, Genertec Plaza, No. 90, Xisanhuan Zhonglu, Beijing, China
6、The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
7、Contact Details
Purchasers:fukangshizhufanghechengxiangjiansheju
Add.:No. 60 Tianshan South Street Fukang City
Contact:Ms. Dong Li
Tel: 86-994-3232361
Bidding Agency:China International Tendering Co.,Ltd.
Add.:Genertec Plaza, No. 90, Xisanhuan Zhonglu, Beijing 100055, China
Contact:Mr. Zhang Zhuoyuan
Tel:86-10-63348532
8、Remittance Approach:
Bank(RMB):Bank of Communications Fuwai Branch
Bank(USD):Bank of Communications Fuwai Branch
Account NO.(RMB):110060149012013147797
Account NO.(USD):110060149012013147797