1、Bidding Conditions
Overview: In order to meet the needs of production, study and research, a batch of mechanical performance evaluation equipment is to be purchased for a total of five packages
Source of Funds:self-financed, implemented.
Description of The Prepared Bidding Conditions:the project has been approved and the conditions for bidding have been met.
2、Bidding Content
Bidding No:0626-194011EH0111/03
Project Name:First batch of mechanical properties evaluation equipment
Place of Implementation:Suzhou City, Jiangsu Province, China
List of Products:
| NO. | Product Name | Quantity | Main Technical Data | Remarks |
| three | 10kN Tensile and Fatigue Testing Machine | one | Vertical dynamic load of the frame: ≥±10kN; axial static load of the frame: ≥±7kN, maximum dynamic/static torque of the actuator ≥±90Nm, maximum torque of the actuator ≥±15 weeks, highest dynamic frequency:≥ 100Hz, actuator structure: linear motor bearing, axial and torsion combined action, can achieve stretching / torsion; compression / torsion composite fatigue test, no hydraulic source, actuator profile in the tender, actuator stroke ≥55mm, experimental space: vertical test test space ≥ 820mm, displacement accuracy: not higher than ± 0.5% of stroke | |
| 50kN Normal Temperature Fatigue Testing Machine | one | Maximum test dynamic load of the main machine: ±100kN; static load: ±100kN, beam adjustment mode: hydraulic lifting, hydraulic locking, independent control switch operation; floor type frame, beam to base height not less than 1000mm; column spacing ≥ 550mm, frame rigidity: not less than 380kN/mm (the beam is 1m from the console), the actuator anti-twist unit is installed on the frame, which can be loaded and unloaded by itself. | ||
| 100 kN High Temperature Fatigue Testing Machine | one | Maximum test dynamic load of the main machine: ？100kN; static load: ？100kN; beam adjustment mode: hydraulic lifting, hydraulic locking, independent control switch operation; beam to base height not less than 1000mm; frame rigidity: not less than 380kN/ Mm (beam to the position of 1 m from the console), the actuator anti-twist unit is mounted on the frame and can be loaded and unloaded by itself. | ||
| 100 kN Electronic High Temperature Low Cycle Fatigue Testing Machine | one | The maximum load of the frame: not less than ？250kN, the rigidity of the frame is not less than 580kN/mm, (the beam is 1m away from the console), the minimum test speed is not higher than 1um/hour; the maximum speed is not less than 280mm/min. The vertical test space is not less than 1500mm, and 350~1500mm is adjustable; the horizontal space of the column is not less than 650mm, the control system requirements: the PID parameters can be automatically set according to the sample stiffness, and the change according to the sample stiffness during the test Adaptive adjustment to support stress, strain, and displacement control. | ||
| 250kN Medium and Low Temperature Fatigue Testing Machine | one | Maximum load of the frame: not less than ？250kN, double column floor structure, 250kN hydrostatic bearing actuator, installed above the beam, the vertical space of the beam to the base is not less than 1900mm, the horizontal space of the column is not less than 650mm, the machine Rack stiffness: no less than 580kN/mm (the beam is 1m from the console), the actuator anti-twist unit must be installed on the frame, which can be loaded and unloaded by itself. | ||
| High Speed Tensile Testing Machine | one | Basic characteristics of the frame: 4-column frame with high rigidity and precision alignment, the maximum load is not less than 1000kN; the actuator is installed above the beam. The adjusting beam adopts hydraulic lifting and hydraulic locking. The base needs to be equipped with XY bi-directional T-shaped trough table. The table size is not less than 1000*700mm, the table height is not less than 600mm, the total height of the machine is no more than 4m, and the frame rigidity is: Not less than 2000kN/mm (the beam is located 1000mm above the pedestal), parallelism: equal to or better than 0.5mm/m, coaxiality: equal to or better than 0.1mm, high-speed data acquisition unit: no less than 8 High speed acquisition channel. | ||
| Drop Hammer Impact Tester | one | The impact tester requires real-time display of the impact curve to obtain data such as impact energy, impact load, impact time, impact velocity, etc.; the maximum impact energy of the test machine is not less than 1800J; the minimum impact energy does not exceed 0.6J; and the energy-mass-speed response curve is provided. , the maximum impact speed of the test machine is not less than 24m/s |
3、Qualification Requirements For Bidder
Qualifications or Performance:(1) All equipment manufacturers or agents from the People's Republic of China or countries or regions that have normal trade with the People's Republic of China(hereinafter referred to as "qualified source countries/regions") can bid; If bidding for the agent, it must have the original of the sole special authorization issued by the equipment manufacturer for the project;
(2) Employment experience:
Bidders must have the same equipment sales performance since January 1, 2016;
(3) Bidders must have after-sales service outlets in the mainland of the People's Republic of China and must provide valid certification materials.
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2019-04-22
Ending of Selling Bidding Documents:2019-04-28
Sell bidding？doc？online？or？not:No
To Obtain::On-site Purchase
Place:Jiangsu Province International Tendering Company(No. 7 Xikang Road, Nanjing) Room 601
Price of Bidding Documents:￥￥1000/$150/$150
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2019-05-14 10:30
Place of Bid:Opening Hall, 16th Floor, International Tender Company, Jiangsu Province(No. 7 Xikang Road, Nanjing)
Place of Bid Opening:Opening Hall, 16th Floor, International Tender Company, Jiangsu Province(No. 7 Xikang Road, Nanjing)
6、The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
7、Contact Details
Purchasers:Suzhou Xiangcheng Industrial Technology Research Institute
Add.:99 Nan Tian Cheng Road, Xiangcheng District, Suzhou City
Contact:luan hao
Tel:0512-66185310
Bidding Agency:Jiangsu International Tender Co., Ltd.
Add.:No. 7 Xikang Road, Nanjing
Contact:jiang yao
Tel:025-83249926
8、Remittance Approach:
Bank(RMB):China CITIC Bank Nanjing Jiangsu Road Branch
Bank(USD):Bank of China Nanjing Gulou Branch
Account NO.(RMB):7321810182600023404
Account NO.(USD):470258225967
