Procurement of 0716-1650XJ040296 Urumqi Metro Line 1 Project Depot Yard Process Integrated Equipment(1)

2016-11-14
Minmentals International Tendering Co.,Ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on2016-11-14
1、Bidding Conditions
Overview:Urumqi Metro Line 1 Project Depot Yard Process Integrated Equipment, financed by KFW Loan.
Source of Funds:KFW Loan
Description of The Prepared Bidding Conditions:The found application report has been approved by NDRC, and the bidding documents have been approved by KFW.
2、Bidding Content
Bidding No:0716-1650XJ040296
Project Name:Urumqi Metro Line 1 Project Depot Yard Process Integrated Equipment
Place of Implementation:Urumqi
List of Products:
NO. Product Name Quantity Main Technical DataRemarks
1 Three-layer working platform 4 Q=16/3.2t,LK=25.5m, Electric double-girder bridge type, EN
2 Working platform 4 Unilateral suspension-type three-layer working platform
3 High-voltage operation safety protection system 2 Safety protection overhead line system of working platform
4 Forklift and carrier 3 Battery car, Q=2T
5 Mobile unwheeling unit 2 Lifting capacity≥16t/set Vertical lifting stroke of bracket 1600 mm, lifting one vehicle (6 vehicles marshalling)
6 Three-dimensional warehousing system 1 laneway with rail (4pcs), stackers (3 sets), goods shelf(8 rows)
7 Purging equipment 1 Including high-pressure washer, dust collector,and dust collector of apparatus panel, has automatic purging mode and manual purging mode
8 Welding machine 12 Welding fume purifier
9 Working platform 19 Refer to the bid document
10 Air compressor 4 1m?/min,1.3Mpa, Mobile
11 Charger and discharger 4 HGCZ106-80A/48V, Automatic constant current charger, Output voltage24~48V
12 Charging bench 1 3500?1000?800mm
13 Storage battery dosing machine Refer to the bid document The maximum acid injection volume of single tube (ml):300-1000(adjustable), acid injection method adopted measuring cup or weight.
14 Electrolyte preparation cylinder 4 300kg
15 Bogie turntable 5 Bearing 25t, 3 pcs; bearing 10t, 2 pcs
16 Static debugging power cabinet 11 DC1500V 400A, 600KW, height﹤1800mm
17 Limit detection device 2 Satisfying vehicle clearance of type A
18 Mobile metro vehicle weighing platform 2 Maximum capacity: 100T
19 Driving-type scrubber 3 Cleaning efficiency≥5100㎡/h
20 Mobile air-conditioning equipment test bench 5 Refer to the bid document
21 Uninterruptible power supply 1 Refer to the bid document
22 DCC office furniture 2 Meets the DCC office arragements on the parking lots and the depots, 10 sets of computers, 2 sets of fax machines and 1 printer
23 LED displayer 6 Refer to the bid document
24 Duty and shift scheduling system 1 Refer to the bid document
25 Train inspection tool 2 Refer to the bid document
26 Air-conditioning lifting appliance 4 Safety operating force: 2T, Effective length: 5m/pcs
27 Bogie lifting appliance 4 Length: 5m, Bearing capacity:10T
28 Process bogie (fake trolley) 12 Load≥200KN
29 Tool cabinet and storage rack 120 Steel structure
30 Desk computer 40 Windows7 system, all-in-One computer, CPU Core i5 series, 4GB, HDD 2T, 21 inches for display, independent card
31 Portable computer 17 Windows7 system, all-in-One computer, CPU Core i5 series, 4GB, HDD 2T, 14 inches for display, independent card
32 Microcomputer workbench 40 Wood
33 Rescue equipment 1 Vehicle straightening system, interphone, jacking-compound rerailer, vehicle puller, turnout retailer, rescue vehicle
34 Bench drilling machine 6 ZQ4012
35 Dust removal grinding machine 4 MC3030
36 Portable image acquisition device 10 Pixel: 10 million and above,optical zoom: 12 times and above
37 Image-text generation device 8 Black and white(A4), Color(A3), laser printer
38 Image-text copy device 11 All-in-one machine integrating print, copy, scan and fax (A4 black and white laser), printer (A3 color), print copier (A3 black and white laser)
39 Testing type 1 Refer to the bid document
40 Metering type 1 Refer to the bid document
41 Car 3 Iveco: 2 doors and 17 seats
42 Motor bus 3 55 sets
43 Light truck 2 Load: 2t
44 Tool car 2 6 sets (pickup)
45 Rescue command vehicle 2 5 seats of SUV
46 Medium-duty truck 2 Load: 5t
47 Steward shift calling system 2 Intelligent control, able to call personnel on duty via various means, standby recording devices can record sounds automatically.
48 Production and safety sign in the field and section 2 the identification and cautionof track area and production
49 Greasy dirt storage device 2 Refer to the bid document
50 Disassembly trolley of hook buffer device 2 Maximum weight-lifting capacity of the hoisting mechanism, Effective hoisting stroke, Minimum height
51 Lifting device of disassembly of gate drive mechanism 2 The maximum lifting height: 2200mm,descending height <200mm,Carrying capacity:100kg
52 Car door disassembly elevator 2 Carrying capacity of the workbench: no less than 300kg
53 Center pin disassembly tool 5 Refer to the bid document
54 Tray for car coupler disassembly 2 Rated load: 500kg, the wheels adopt the rubber wheel with locking function
55 Coupling disassembly equipment 2 Refer to the bid document
56 Oil injection and discharge device of gear box 2 Refer to the bid document
57 Gear box supporting trolley 4 adopted the universal bogie
58 Test bench of high-speed circuit breaker 1 Output current (rated): 5A, Output voltage: continuously adjustable; Output voltage: DC15V
59 Pipeline dredger 3 The equipment is used for the elimination and dredge of dirt, grease, sediment and waste in the pipeline.
60 Hydraulic pipe bender 2 The equipment is used foe the angle bending of common water pipe, conduit, gas pipe and thick steel tube.
61 Universal checking apparatus of AC/DC meter 1 The equipment is used to calibrate and verify various instruments and universal meters with the DC below class 0.1 and class 0.2.
62 Portable oscilloscope 1 DC millivolt: 600mV, DC voltage:600V
63 Digital multi-meter 2 Refer to the bid document
64 Digital temperature and humidity tester 1 Measuring range: Humidity:10% ~ 95% R.H; temperature: -20 ℃ ~ +60℃ (-4℉ ~ +140℉ ); dew point: -144 ℃ ~ 58.5℃ (-47.2℉ ~ +137.3℉ )
65 Digital illuminometer 1 200/2000/20000/200000 Lux;20000 lux-reading x 10;200000 lux-reading x 100
66 Simulated high-pressure megger 1 Resistance range: 500K?---500G?, Voltage range: 500/1000/25000/5000
67 Digital high-pressure megger 1 Resistance range: 0.01M---5T?, Voltage range: 250~5000V
68 AC/DC clamp meter 1 Current measurement:10mA~200A AC, five sections of range; Frequency:30~1000Hz
69 Plate shearing machine 1 Shearing thickness:6mm; Shearing width:2500mm
70 Portable NC cutting machine 1 Effective cutting range of X axis: 1700mm; Effective processing range of Y axis: 2500mm;
71 Layout bench 1 Be in accordance with the Execution Class 1 of National Metrological Verification Regulations.
72 Die head threading machine 1 Processing range (cun):1/2--2
73 Band-sawing machine 1 Sawing range(mm): Φ250 270×250
74 Ultrasonic fault detector 1 Transmission pulse: Negative square wave, continuously adjustable transmission voltage 25-250V with stepping 25V. Width is continuously adjustable within 50-800ns. At the setting of 400Ω/200V, the both edges are less than 10ns and in high frequency, they automatically optimize to be pulsed excitation.
75 Ultrasonic cleaner 1 Dimension of interior groove(mm): 960? 630?350; Ultrasonic frequency (kHZ):20/30
76 Comprehensive simulation training system 1 simulation training system of global function train driving, OCC simulating training system and station attendant simulation training system for each 1 set
77 kitchen equipment 2 Each set of equipment contains one set for preparing Halal food and one set for preparing non-Halal food which can accomodate 700 and 150 persons respectively at the same time.
78 Traverse table 1 Shallow pit type, >30m, load capacity>47t
79 Process bogie (false trolley) 48 Refer to the bid document
80 Single-trolley weighing platform 1 Accuracy grade: C3
81 Micro-control single-trolley brake tester 2 Refer to the bid document
82 Headstock repair device 1 Load capacity:500kg, Maximum lifting height≥2800mm, Minimum lifting height:1000mm
83 Bogie lifting platform 7 Lifting capacity: 10000kg, Lifting height: 0~1600mm
84 High-pressure washer 1 Electrical heating, Temperature 85℃, Rated flow (l/h):300-800 adjustable; Rated pressure (MPa):3-150 adjustable
85 Cantilever 5 Lifting weight:2000kg; Lifting height: 2.5m; Rotation angle: two 270? (two 360?); Rotation radius: 4m.
86 Axle box/bearing wheel disassembly machine 1 Maximum withdrawal force500kN; Maximum pressure assembling force500kN; Piston stroke>300mm
87 Wheelset paint removal equipment 1 Wheelset diameter: 760~860 mm; Working rotation speed of wheelset: 1.8 rpm; Traveling speed:10m/min
88 Wheelset measuring device 1 Measurement contents: measurement of wheel treads profile, wheel inner-side distance, strake width, wheel diameter, flange height, flange thickness and journal.
89 Special wheelset magnetic particle flaw detector 1 Working capacity: 2.5min/wheels; Working range: flaw detection on surface of bullet train and trailer axle (including journal), spoke board, fluorescent magnetic particle;
90 Pass-type wheelset ultrasonic flaw detector 1 Refer to the bid document
91 Wheelset ultrasonic flaw detector 1 Refer to the bid document
92 Wheel lathe 1 Difference of wheel contour shape: ≤0.20mm; Maximum feed cutting depth: ≤8mm; Tread profile:≤0.2mm; Run-out of rim tread ≤0.15mm; Run-out of processed inner side surface ≤0.15mm; Diameter difference of wheel of the same processed wheelset ≤0.15mm; Processed surface roughness Ra≤6.3μm
93 Bogie turntable 14 Turnplate bearing 4t
94 Framework roll-over stand 2 Lifting stroke: 1400 mm; Roll-over angle: ?360?; Bearing capacity: 3t
95 Framework storage rack (movable type) 10 Storage rack of framework is of movable type, and locking is required in usage. Traveling wheel is not affected by force in fixing position.
96 Three-dimensional framework storage rack (foldable) 108 Each group of storage rack consists of three racks which can be stacked up for three layers, and each layer of storage rack is equipped with hoisting position. One framework is stored in each layer.
97 Framework test platform 1 Working face (length * width): 4000?2500mm;Total height: 400 mm; Flatness of working face: 2 levels
98 Axle box/bearing wheelset assembling machine 1 The maximum withdrawal force 500 kN; The maximum pressure assembling force 500 kN; Piston travel >300mm
99 Trailer wheelset running-in test bench 1 Rotate speed of input end 0-5000r/min; Temperature test range: -20℃-300℃
100 Bearing storage cabinet 6 Storage rack has settings of 4 upper and lower layers
101 Bearing storage rack 8 Refer to the bid document
102 Static load test bench of bogie 1 Adjustment range of position of secondary loading force:?650-?1250mm; positional accuracy: ?1mm; Measurement range of wheel base: 2000-2500mm, measurement accuracy: ?0.5mm; Measurement error of the height of four corners of bogie: ?0.5mm
103 Air-tight test device of bogie 1 Refer to the bid document
104 Electric flat vehicle 1 Bearing capacity: 10t;
105 Bogie turntable (no passing) 22 Turnplate bearing 8t
106 Runner machine 1 Speed regulation form: continuously viable
107 Wheelset painting room 1 Refer to the bid document
108 Tool cabinet 2 1000?500?2000, 6 layers, adjustable
109 Storage rack 2 1500?500?2000, 5 layers, adjustable
110 Gear box supporting trolley 76 Wheel diameter: ≮ Φ100mm
111 Pressure relief test equipment of framework 2 Test pressure 600kpa (maximum Test pressure 800kpa)
112 Induction heater 1 Maximum temperature: 270℃; Maximum diameter: 340mm; Maximum width:150mm
113 Box-type heater 1 800?800?1000
114 Rolling conveyor belt 1 Overall length of equipment: 14m; Roller width: 600mm; Equipment load: no less than 1000kg
115 Framework layout bench 1 Planeness of working face: grade 2
116 Air spring disassembly and assembly platform 2 Load capacity: 220kg
117 Air spring test bench 1 Maximum load :200kN; Test height:100mm-350mm; Maximum test distance:850mm; Maximum diameter of air spring: 800mm  
118 Air spring storage rack 12 Refer to the bid document
119 Primary spring storage rack 6 Refer to the bid document
120 Primary spring tester 1 Maximum loading pressure: 50KN
121 Double workbench 1 Load:no less than 500kg
122 Tool cabinet 2 1000?500?2000, 6 layers, adjustable
123 Motor purging room 1 Purging pressure: 0.6MPa
124 Motor storage rack 10 2-layer three-dimensional storage racks
125 Motor detection equipment 1 Winding resistance:10 μ? -2000 ?; Winding inductance:100μH-5000 mH
126 Motor overhaul stand 2 Working stand dimensions:1500?1000?800mm; Rated load:500kg
127 Test bench of traction motor performance 1 Insulation resistance measurement:100 kΩ - 5 TΩ, precision 2%; Three phase AC circuit voltage range 1500V; Three phase AC circuit current range:100A; Measurement range of DC circuit resistance: 0-1KΩ; Measurement range of temperature :-25℃-200℃; Measurement range of rotation speed 0-2000r/min
128 Auxiliary tools of motor overhaul 1 Refer to the bid document
129 Tool cabinet 1 1000?500?2000, 6 layers, adjustable
130 Vacuum drying oven of traction motor 1 Tank dimension:φ1500×2000mm; Maximum allowable temperature:130℃;Rated heating temperature:110±10℃
131 Dynamic balancing device 1 Maximum operating quality: 100-2000 kg;Maximum diameter of workpiece: 1000mm; Shaft diameter range of the workpiece: 50-300mm
132 Fan blade extractor of auxiliary motor 1 Press mounting force: 7.3-12MPa; Press mounting stroke: 0-200mm; Adjustable stroke of bracket: 0-50mm
133 Movable withstand voltage test bench 1 Pressure resistance:Output voltage (kV): (0-5.000/5.000)(AC/DC); Output current (mA): (0-99.99/20.00)(AC/DC); Insulation: Voltage range (V): 250/500/1000 Resistance range (MΩ): 1-9999
134 Pinion induction heater 1 Heating range of diameter of hole: Φ90-Φ300; Limit of temperature rise: 250℃
135 Test bench of auxiliary motor 1 Frequency conversion: 0-3000rpm;Temperature detection range: -10-150℃
136 Bearing heater 1 Temperature range: R.T 20℃-200℃
137 AC arc welding machine 1 Rated output current:315A; Current adjustment range:40-315A
138 Overhaul roll-over stand of traction motor 2 Load quality: 1000kg
139 Railway trolley 2 Rated load:800kg
140 Cleaning equipment of traction motor 1 Washing pressure: 0.8-1.0MPa; Number of sprayers: 80
141 Member bar inspection stand 1 The bench is welding structure with structural steel frame.
142 Member bar storage rack 6 Refer to the bid document
143 Traction base inspection stand 1 The bench is welding structure with structural steel frame.
144 Traction base storage rack 6 Standard specifications: 1200?800?150 and bearing 4t
145 Rubber joint pressing machine 1 Maximum stroke of indenter (mm): 500; Carrying capacity of workbench (t) : ≮150
146 Movable magnetic particle flaw detector 1 AC magnetization current: 0-2000A continuously adjustable, make-and-break energization in short time, with Phase controlled circuit breaker and the remanence stability no more than ±5%;Automatic demagnetization current: 2000A-0 continuously adjustable, with demagnetization time less than 5 seconds.
147 Auxiliary overhaul tool 1 Refer to the bid document
148 Tool cabinet 1 1000?500?2000, 6 layers, adjustable
149 Ultrasonic cleaner 1 Ultrasonic frequency: ≥28KHz; Size of inside groove: ≥800×500×400mm;Self-heating constant temperature system 30℃-100℃ adjustable temperature;Load bearing: ≥500kg
150 Storage rack of unit braking device 12 Refer to the bid document
151 Assembly and disassembly equipment of unit brake 2 Rated pressure: 7Mpa with allowance made; Oil cylinder diameter: 160mm;Stroke: 250mm
152 Double workbench 1 1600×800×800mm; load bearing: ≥500kg
153 Test bench of unit braking device 1 Pressure measurement of brake shoe: 1-70kN,accuracy 2% Fs; Measurement range of brake shoe stroke: 0-125 mm
154 Ultrasonic cleaner 1 Ultrasonic frequency: ≥28KHz; Size of inside groove: ≥800*500*400mm; Self-heating constant temperature system 30℃-100℃ adjustable temperature. Load bearing: ≥500kg
155 Special overhaul tool 1 Overhaul work of brake unit
156 Tool cabinet 1 1000?500?2000,6 layer, adjustable
157 Storage rack of axle box 12 Refer to the bid document
158 Overhaul workbench of axle box 1 Rated load: 100kg, Bed dimension (L*W*H): 2500*800*800mm
159 Movable magnetic particle flaw detector 1 Refer to the bid document
160 Ultrasonic cleaner 1 Ultrasonic frequency: ≥28KHz; Size of inside groove: ≥800*500*400mm; Self-heating constant temperature system 30℃-100℃ adjustable temperature. Load bearing: ≥500kg
161 Tool cabinet 1 1000?500?2000, 6 layer, adjustable
162 Storage rack for bogie accessories 10 1500?500?2000, 5 layer, adjustable
163 Double workbench 1 1600×800×800mm; load bearing: ≥500kg
164 Tool cabinet 1 1000?500?2000, 6 layer, adjustable
165 Test bench of grounding device 1 Spring pressure range: 0-250 Kpa; Magnetometer range: 5?10-4T; Relative magnetic field production of demagnetizer: 70 MT
166 Test bench of oil damper 1 YGZQ-I type
167 Storage rack of oil damper 6 Refer to the bid document
168 Single-column calibration pressing machine 1 Nominal force: 630; Maximum distance of lower surface of sliding block to workbench:630
169 Double workbench 1 1600×800×800mm; load bearing: ≥500kg
170 Manual washing platform 1 2000×800×800mm; load bearing: ≥100kg
171 Tool cabinet 2 1000?500?2000, 6 layer, adjustable
172 Coupling overhaul stand 1 2500×800×800mm; load bearing: ≥200kg
173 Coupling storage rack 8 Refer to the bid document
174 Ultrasonic cleaner 1 Ultrasonic frequency:≥28KHz; Size of internal groove: ≥800*500*400mm; Self-heating constant temperature system the temperature from 30℃ to 100℃ is adjustable. Load:≥500kg
175 Tool cabinet 1 1000?500?2000, 6 layer, adjustable
176 Parts storage rack 6 Refer to the bid document
177 Overhaul workbench 2 1200×800×400mm; load bearing: ≥500kg
178 Ultrasonic cleaner 1 Ultrasonic frequency:≥28KHz; Size of internal groove: ≥800*500*400mm; Self-heating constant temperature system the temperature from 30℃ to 100℃ is adjustable. Load:≥500kg
179 Comprehensive test bench of valves 1 Air source input: ≥1.0 Mpa; System wind pressure: 0-0.9MPa (adjustable); Precision of pressure gage: Grade 1.5
180 Special overhaul tool 1 Refer to the bid document
181 Movable air compressor 1 Gas displacement: 1m3/min;Discharge pressure: 0.8MPa;Cooling method: air-cooled type
182 Tool cabinet 3 1000?500?2000, 6 layer, adjustable
183 Comprehensive test bench of valves 1 Air source input: ≥1.0 Mpa; System wind pressure: 0-0.9MPa (adjustable); Precision of pressure gage: Grade 1.5
184 Test bench of braking hose 1 Test pressure: Water pressure max 2.5 MPa; air pressure max 1.8 MPa ;
185 Storage rack 2 1500?500?2000, 5 layers adjustable
186 Bearing storage rack 48 Refer to the bid document
187 Bearing dimension tester 1 Measurement range: ≥120mm
188 Transfer trolley 10 Maximum load: 0.3t
189 Test equipment of driving device 1 Rotate speed at input end: 0~5000r/min; Equivalent operating speed of wheel set: 0--80km/h
190 Air-conditioning transport cart 2 Dimension: about 3500*2000*350mm; Rated load: 2000kg
191 Storage rack of air-conditioning unit 27 3-layer three-dimensional storage rack
192 High pressure washer (natural heating) 1 Rated flow (l/h): 300-800 adjustable; Rated pressure (MPa):3-150Mpa
193 Lifting platform of air-conditioner overhaul 2 Lifting height: ≥900mm ; Lifting weight: 2000kg
194 Blade and bearing detacher 1 Maximum oil pressure of hydraulic system: 10MPa Maximum oil pressure in working adjustment : 7MPa+D257
195 Dynamic balancing test bench of fan 1 Maximum work quality (kg) ≤50; Maximum diameter of workpiece (mm) φ600; Balancing rotate speed (rpm) 400
196 Test bench of fan performance 1 Display resolution of wind pressure: 10Pa Display resolution of wind volume: 10m3/h
197 Test bench for performance of air-conditioning unit 1 Humidification capacity ≤58 kg/h (adjustable); Measurement range of wind volume 3000-7000 m3/h; Test range of refrigerating capacity 20kW-48kW
198 Refrigerant filling and recovery device 1 Applicable refrigerant: R12, R134a, R22 and R407c; Recycling speed: gas state 10kg/h , liquid state 1Kg/min; Compressor (HP) 1/2HP; Vacuum pump: 2L/s double-stage pump; Refrigerant tank: 22.7Kg6 gas-liquid steel cylinder with double valves
199 Refrigerant leak detector 1 Maximum precision: 0.5 g/year (0.02 ounce /year); Refrigerant detection: R22, R134a, R404A, R410A and R407C refrigerants
200 Welding equipment of refrigeration pipe system 1 Refer to the bid document
201 Pipe bender 1 Cooper pipe bender and the specification 6-10 is three-use pipe bender
202 Storage rack 2 1500?500?2000, 5 layers adjustable
203 Tool cabinet 2 1000?500?2000, 6 layers adjustable
204 Storage rack of car coupler 12 2 car couplers are placed in each layer
205 Car coupler disassembly and assembly table 2 Rated load: 500kg
206 Car coupler detection tool 1 Refer to the bid document
207 Roll-over stand of buffer disassembly 1 Maximum pressure assembling force: 200T Stroke of high-pressure cylinder: (65?5) mm
208 Test bench of tight lock coupler 1 Moving stroke at the time of coupling: 600-800mm Coupling speed of car coupler:≥0.6km/h
209 Ultrasonic cleaner 1 Ultrasonic frequency: ≥28KHz; Dimension of internal groove: ≥800*500*400mm; Self-heating constant temperature system the temperature from 30℃ - 100℃ is adjustable. Load:≥500kg
210 Movable magnetic particle flaw detector 1 Input voltage:AC220V50Hz; Allowable fluctuation range of input voltage: 140-260V Constant voltage output: 36+2V
211 Storage rack 2 1500?500?2000, 5 layers adjustable
212 Tool cabinet 2 1000?500?2000, 6 layers adjustable
213 Cutting and grinding device of carbon contact strip 1 The left and right stroke of grind: 900mm; Moving speed of indenter: 2.5m/min Grinding pressure of sanding belt: 0.2-0.5MPa; Air volume of dust collector: 5.2 m?/min
214 Portable pantograph tester 1 Tension scope: 0-200 N; Height: 0-3000 mm; Time of the rise and fall of pantograph: 0-99 S; Sampling rate: 100 times/s; Speed of the rise and fall of pantograph: 5 mm/s
215 Pantograph test bench 1 Power input: AC220V, 3N, PE, 50Hz, 2kVA; Protection function: overcurrent, overpressure, loss of pressure; Size of pantograph adminicula: 1750?1200?300 mm; Console:1300?1000?1700 mm
216 Bench drilling machine 1 Maximum drilling diameter is 12mm; Maximum travel of spindle is 100mm
217 Dust removal grinding machine 1 Revolution: 1420 r/min; Work quota: 40%; Temperature rise: 75℃
218 Pantograph overhaul stand 1 Load bearing: no less than 300kg
219 Pantograph storage rack 4 three layers vertical storage rack, each layer of the storage rack can store 1 pantograph
220 Double file bench 1 Boundary dimension: 1600*800*800mm; Load bearing: no less than 500kg
221 Storage cabinet 2 1500?500?2000, 5 layers adjustable
222 Tool cabinet 1 1000?500?2000,6 layers adjustable
223 Storage rack of car door 75 each storage lattice stores 10 doorway page of passenger compartment door
224 Storage rack of gate drive mechanism 45 Each layer can store 5 door drive mechanisms
225 Tooth belt tension detector 1 Measurement range: 10Hz-500Hz; Numerical resolution of measurement: 1Hz
226 Double workbench 2 Boundary diamension: 1600*800*800mm; Load bearing: no less than 500kg
227 Test bench of car door 2 Input power: AC.50Hz 220V 5 A; Output power: DC 110V; Force measurement range: 30 N-500 N; Size of test platform: 2000*1600*2050 mm
228 Portable clamping force tester for car door 1 Maximum allowable measuring peak force: 300N deviation<0.2%; Measurement range: 50-300N deviation<0.2%; Load instruction impedance: 10±0.2N/mm Size of measuring plate: diameter φ100mm ;height 115mm
229 Overhaul platform of car door 2 Boundary dimension: 1600*800*800mm; Load bearing: no less than 500kg
230 High pressure washer (natural heating) 1 Rated flow (1/h):300-800 adjustable; Rated pressure:3-150Mpa
231 Ultrasonic cleaner 1 Ultrasonic frequency: ≥28KHz; Size of inside groove: ≥800*500*400mm; Self-heating constant temperature system: 30℃-100℃, temperature is adjustable; Load bearing: no less than 500kg
232 Storage rack 2 1500?500?2000, 5 layers adjustable
233 Tool cabinet 2 1000?500?2000, 6 layers adjustable
234 Electric high-pressure spray gun 1 Maximum output pressure: 20MPa; Maximum spray flow: 2.2L/min; Nozzle diameter: 0.15-0.22mm; Best spray distance: 400-600mm; Spray width: 250-500mm
235 Repair workbench for seat 1 Refer to the bid document
236 Workbench for rubber and flooring 1 Boundary dimension: 3000*2000*600mm
237 Glass workbench 1 L*W*H: 3000*2000*800mm Table facet: 25mm basal plate, 3mm steel plate, 5mm hair felt
238 Inverter test bench 1 Rated input voltage: DC 1500V; Output DC 0V-DC 2000V, the voltage is continuous and adjustable, designed capacity rated output 880KVA, the peak value 1300KVA. Control power supply: DC 110V or AC 220V?10% 50?1Hz; Other power supplies: AC380V?10% 50?1Hz three-phase-five-wire system. Measurement accuracy: Voltage: ?0.6%, Current: ?0.6%, Power: ?0.6%
239 Test bench for brake resistance 1 Adjustable range of DC voltage: 20-150V 3A; A/D conversion resolution: 12 bits; A/D conversion time: 10us; D/A conversion resolution: 12 bits; Maximum counting frequency: 2MHz
240 Insulation resistance tester 1 The teating voltage reaches up to 5kV and suits all applications; CAT III 1000 V, CAT IV 600 V safety level
241 Dedusting and purging equipment 1 Air pressure≥0.6 mpa; Load quality: ≥3000 Kg; Self-locking form: wheel gear self-locking
242 Storage rack for high-speed circuit breaker 12 Refer to the bid document
243 Storage rack for brake resistance 12 Refer to the bid document
244 Inverter storage rack 12 Refer to the bid document
245 Test bench for air compressor 1 Air reservoir: 250Lmm; Flow measurement range: 0.8-1.2m3/min; Speed adjustment range: 0-2000rpm
246 Lifting workbench 4 Bearing capacity of working platform: 500kg; Maximum lifting height of working platform: 3800mm; Lifting rate: 2000mm/min
247 Insulation resistance tester 1 Test voltage shall reach 5kV and be applicable to all the uses; CAT III 1000 V, CAT IV 600 V Safety level
248 Storage rack 2 1500?500?2000, 5 layers adjustable
249 Oil filter 1 Flow rate: 9000 L/H Working vacuum degree: -0.06- -0.098MPa Working pressure: ≤0.5 MPa Work noise: 80 dB(A) Thermostatic control range: 0-100℃
250 Bench drilling machine 1 Maximum drilling diameter: 12 mm; Maximum travel of spindle: 100mm
251 Grinding platform 1 Grade: 400?400I
252 Overhaul workbench (assembly platform) 2 Bed dimension (L*W*H): 1200*800*400mm Rated load: 500Kg
253 Double file bench 1 Outline dimension: 1600*800*800mm; Load bearing: no less than 500kg
254 Double overhaul workbench 1 Outline dimension: 2500*800*800mm; Load bearing: no less than 100kg
255 Cleaning tank 1 Specification and dimension: 1200*600*600mm
256 Electrothermal constant-temperature dry box 1 Temperature range: R.T+20~300℃; Temperature stability::±1℃ ;Temperature gradient:±2.5%
257 Movable framework magnetic particle flaw detector 2 Peak 0-1400A (virtual value 0-1000A), continuously adjustable;Self demagnetizing current: Peak1400A-0(virtual value1000A-0), continuously adjustable;Circumferential magnetizing current (A): 1000 Longitudinal magnetizing current (A): 440
258 Spray dust treatment device 1 Inside dimension: 3850×3000×2300; Outside dimension: 4000×3500×3000 ; Indoor no-load wind speed: ≥0.40;Total air supply capacity: 22000m3/h ;Total air exhaust volume:21500m3/h
259 Drying equipment 1 Temperature control range:+10~500℃; Constant temperature procision:+1%; Volume:420L;Liner dimension:640x585x1355mm
260 High-voltage airless spraying equipment 2 Maximum output pressure: 250Bar Maximum output flow: 2.2 L/Min Nozzle caliber 0.15 - 0.22mm Best spraying distance: 350 - 400mm Maximum pressure of high pressure pipe 1000Bar
261 Spraying flatcar 1 Rated load:800kg
262 Framework track car 4 Load capacity: 2000kg; Bench lot dimension: 2200?1980mm; Height of support column: 800mm
263 Storage rack 2 1500?500?2000, 5 layers adjustable
264 Tool cabinet 2 1000?500?2000, 6 layers adjustable
265 Bogie turntable 2 \ Bearing capacity of turnplate :8t; Equipment outline dimension :no bigger thanφ3000mm
266 Shot blasting equipment 1 Flow rate: 4.0m3/min; Impeller head: impeller diameter: 360mm; Maximum shot blasting capacity: 200kg/min; dust concentration of operating area≤10mg/m3; number of filter drum: 4; Outdoor dust emission concentration≤100mg/m3
267 Purging platform 1 Bed dimension (L*W*H): 2500?800?800mm; Bearing capacity of workbench: 1000kg; Thickness of rubber plate: 5mm
268 Double workbench 1 Outline dimension: 1600*800*800mm; Load bearing: no less than 500kg
269 Test bench of cab controller 1 Output voltage of the potentiometer of the driver controller: DC 0-15V Computer data acquisition card K-816: switching value 16-way; analog quantity 32-way K-843 on-off output card of optical isolation: switching value 64-way
270 Test bench for voltage and current sensor 1 Output current of the current source: 0-4000A AC Resolution :1A; Output voltage of the voltage source: 0-2000V DC Resolution:1V; Power supply of the transmitte : ±24V,0.5A,±15V,0.5A
271 Test bench for speed sensor 1 Type and power of the drive motor: YZA7124 370W; Output current:0-20 mA; A given range of the rotate speed:0-1500 r/min
272 Relay test bench 1 DC power output: DC 0-150V 5A; AC power output: AC 0-250V 1A; Measurement range of actuation time:0 - 3S; Communication mode:RS-485 or network card; Accuracy grade of the instrument:grade 0.5; Measurement range of the resistance:1uΩ-100kΩ
273 Test bench for solenoid valve 1 DC voltage output: DC0-120V (adjustable); Output power: 0.5KVA; Measuring error <1%
274 Test bench for comprehensive electrical appliance 1 Power: AC220V,50Hz. Power capacity: no less than 2KVA; DC adjustable voltage: voltage 0-150V; Current: 5A; DC current (can be up-regulated) : current: 0-400A Voltage 6V; Insulation measurement scope: 500V grade: 500MΩ, 1000V grade: 1000MΩ Measuring resistance: 0.0001-199.9Ω
275 Movable pressure-resistant test bench 1 Withstand voltage: Output voltage (kV): (0-5.000/5.000) (AC/DC); Output current (mA): (0-99.99/20.00)(AC/DC); Insulation: Voltage range (V) : 250/500/1000; Resistance range (MΩ) 1-9999
276 Test bench for power component 1 The equipment is a measuring instrument of comprehensive parameters applied to the measurement of common static parameters of on-state and off-state gate pole of thyristor. See 3.24.10
277 Test bench for electronic circuit 1 Refer to the bid document
278 Test bench for semiconductor component 1 It is the special instrument which is able to observe the characteristic curve of all types of transistor in the fluorescent screen of oscillograph;See 3.24.12
279 Test bench for train broadcasting equipment 1 Input power: 110V/5A, 24V/10A, 5V/10A; Audio output: 20~20KHz; Size: 2500*2000*800
280 Ultrasonic cleaner 1 Ultrasonic frequency: ≥28KHz; Size of the inside groove: ≥800*500*400mm; Self-heating constant temperature system 30℃-100℃ adjustable. Load bearing: no less than 500kg
281 New type of electrothermal blowing drying box 1 Working chamber volume (L):640; Dimension of the working chamber (mm):800×800×1000; External dimension (mm):1070×1300×1280; Power (kw):7.5; Temperature range: R.T 0℃~ 300℃;Temperature fluctuation: ±1℃; Temperature uniformity: ±2.5%
282 Storage rack 4 1500?500?2000, 5 layers adjustable
283 Winding machine 1 The principal axis adopts AC dynamo for frequency control; Automatic for/backward direction judgement circuit; See 3.24.17
284 Single-column correction hydraulic machine 1 (Y41-25C)
285 Shaper 1 BH6070
286 General lathe 1 CA6140?1000
287 General lathe 1 CA6250?2000
288 Radial drilling machine 1 Z3050?16
289 Universal miller 1 Refer to the bid document

3、Qualification Requirements For Bidder
Qualifications or Performance:(a) The Bidder shall provide the Tenderer with technically sophisticated product verified
in application. The Bidder has provided relevant equipment with similar purpose and function in service for international and domestic markets at least 2 projects (Contracts worth more than RMB 30 million in each project) in operation in the last 5 years with fair user feedback and without negative record of complaint due to product quality. The product is suitable for Chinese environment and market conditions with successful and stable service experience and fair after-sales services. The Bidder shall provide certificates including certification of concerning users and contracts without relatively severe problem of quality or construction period.
(b) The Bidder shall have production ability of at least one kind of equipment in the scope of supply.
(c) The design life of Equipment structure and its main spare parts and components shall be 30 years.
(d) Bidders or a JV member shall have signed at least one contract for supply of goods and performance of related services in terms of international competitive bidding(ICB) under a domestic project financed through a loan by an international financial institutes or a foreign government in the past 5 (five) years.

Joint Bids:Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2016-11-14
Ending of Selling Bidding Documents:2016-12-27
To Obtain::On-site Purchase
Place:Room D216-2,No.5, Sanlihe Road, Haidian District, Beijing China
Price of Bidding Documents:¥¥2000/$300/$300
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2016-12-28 10:00
Place of Bid:Bid opening room, the 4th floor, No.5, Sanlihe Road, Haidian District, Beijing China
Place of Bid Opening:Bid opening room, the 4th floor, No.5, Sanlihe Road, Haidian District, Beijing China
6、The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
7、Contact Details
Purchasers:urumqi urban rail group co., ltd.
Add.:257 Songshan Rd, Economic & Tech Development Zone 830026 Urumqi PR China.
Contact:PANG Chao
Tel:0991-3925029
Bidding Agency:Minmentals International Tendering Co.,Ltd
Add.:Room D216-2,No.5, Sanlihe Road, Haidian District, Beijing China.
Contact:WANG Jian, YU Meng
Tel:010-88821702、010-88821712
8、Remittance Approach:
Bank(RMB):Captial Stadium Branch, Beijing, ICBC
Bank(USD):
Account NO.(RMB):0200053709022105773
Account NO.(USD):