1、招标条件
项目概况:江苏滨海液化天然气（LNG）项目低温蝶阀（20”以上）
资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:已具备
2、招标内容
招标项目编号:0704-2040JDCP0146
招标项目名称:江苏滨海液化天然气（LNG）项目低温蝶阀（20”以上）
项目实施地点:中国江苏省
招标产品列表(主要设备):
| 序号 | 产品名称 | 数量 | 简要技术规格 | 备注 |
| 1 | 低温蝶阀（20”以上） | 22台 | 见技术规格书 |
3、投标人资格要求
投标人应具备的资格或业绩:业绩和资格要求：
References and Qualification requirement:
1）资质要求：
Qualification？requirement:
A.投标人必须是具有独立法人资格的低温蝶阀制造商或代理商。
独立法人资格要求：关境内投标人应提供有效的营业执照、组织机构代码证、税务登记证或三证合一营业执照等。关境外投标人应提供有效的独立法人证明。以证明投标人具有独立法人资格。
Bidder shall be？manufacturer or authorized agent designated by manufacturer with the？qualification of independent legal entity. Bidder from within the PRC Customs？Territory shall provide valid business？license,Organization Code Certificate and tax registration certificate or integrated business license combined above three？certificates. Bidder from outside the PRC Customs Territory shall provide valid？independent legal entity certificate.
B.代理商要求：如果投标人所投的货物不是投标人自己制造的，投标人应得到货物制造商的同意以及证明其在本次投标中唯一提供该货物的正式授权书。
If the goods is not？manufactured by bidder, the bidder shall obtain the only legal official？authority of the manufacturer that the bidder could provide the goods for thebid in China.
C. 投标人应提供阀门制造商以下三类有效认证证书复印件，若三类认证证书包含产品的类型、口径、温度和压力等级其中的一种或几种参数，则其证书中的相应参数须覆盖本次招标的产品对应最高参数要求。所有证书认证的制造商名称应与其所提供业绩的制造商、此次投标货物的制造商一致。
The bidder shall provide？copies of the three type certifications of the manufacturer when？bidding, if the three type certifications include one or several parameter ofvalve type, size, temperature and pressure, the corresponding parameter shall？cover the corresponding valve’s highest parameter inthe bidding documents. And the name of the certificates shall be the same with？the manufacture of？References and the manufacture of？the bidding Goods:
（1） 压力设备认证证书：制造商应具有中国国家质监局颁发的特种设备制造许可证（A2(2)级）、特种设备型式试验证书和压力设备(PED)认证证书中的至少一种；
Pressure equipment？certification：The manufacturer should？have at least one？certificate through the Manufacturer license of Special？Equipment People’s Republic of China issuedby General Administration of？Quality Supervision(Certificate level for cryogenic valvesA2(2)),Certificate for Type Test ofSpecific Equipment and certificate for pressure equipment（PED）.
（2） 防火认证证书：制造商应具有API607或API6FA或ISO10497防火证书，认证机构应为Lloyd's、BV或DNV等；
Fire safe certification：Vendor should provide API 607 or API 6FA or ISO10497 fire test？certification offered by Lloyd's, BV, DNV , etc.
（3） 低泄漏认证证书：阀门必须具备可靠的外密封性能，应至少达到TA-LUFT或ISO 15848-1的要求，并提供相关测试的TA-LUFT证书或ISO 15848 PART 1的认证。
Leakage certification：Valves？shall have a reliable outside sealing performance and meet？the requirements of TA-LUFT or ISO 15848-1. VENDOR shall provideTA-LUF certification or ISO 15848 PART 1.
D. 从中华人民共和国关境内提供的货物：投标截止时间前已进口的货物：不接受；投标人拟自行进口后销售给招标人的货物：不接受。
For goods？offered？from？within？PRC？customs？territory:goods already imported？prior to the deadline for submission of bids（not allowed）；Goods that？the bidder intends to import by itself and then sell it to the Tenderee after？import （not allowed）
E. 限位开关应满足国家市场监督管理总局公告〔2019年第34号〕《市场监管总局关于防爆电气等产品由生产许可转为强制性产品认证管理实施要求的公告》的要求，须在供货时提供CCC认证。
Limit Switches shall meet there？quirements of the announcement of the State Administration of market？supervision [No. 34 in 2019] 《noticeof the State Administration for Market Regulation about explosion-proofelectrical products change from production license to compulsory product？certification》.And the vendor should？provide China Compulsory Certification on delivery.
2）财务要求：投标人应提供2016-2018年审计机构出具的财务审计报告及经审计的财务报表，包括资产负债表、现金流量表、利润表。
Bidder？shall submit？2016-2018 audited financial report issued by auditing agency,including balance？sheets, cash flowstatement, profit statement.
2016-2018年的年平均净资产：不低于等值1000万元人民币；
Average net assets of last three years (from 2016 to 2018): notless than RMB 10,000,000 Yuanor equivalent;
2016-2018年的年平均资产负债率：小于0.85。
Average asset-liability ratio of last three years (from 2016 to？2018): less than 0.85.
3）业绩要求：
Performance requirements:
A. 制造商自2006年1月1日至投标截止之日（合同签署时间），须具有至少2座国内LNG接收站（规模不小于200 万吨/年）深冷蝶阀使用业绩，其中有一个单项合同供货业绩包含深冷蝶阀供货总数不低于10台，且此单项合同中至少有1台尺寸≥42"且磅级≥150LB的深冷蝶阀。
A.？From January 1, 2006 to？the deadline for submission of bids（according to the date of contract signature）, the manufacturer shall have at least 2 domestic LNG receiving？terminals (with a scale of no less than 2 million tons/year) performance of？operating cryogenic butterfly valves, among them there is at least one contract？of which has no less than 10 sets cryogenic butterfly valves and one set？42" and above and 150LB and above cryogenic butterfly valves.
B.投标人须提交有效的业绩表和相关证明文件（“1.合同复印件相关章节”和“2.用户使用证明或用户调试报告”。如前述1和2无法体现接收站名称和规模，须提供其它证明接收站名称和规模的公开发行文件）。业绩证明文件必须至少体现以下内容：合同签署时间、货物名称及类型（深冷蝶阀）、装置名称及规模（LNG接收站，不小于200万吨/年）、供货数量、阀门尺寸、磅级。未提交业绩证明文件，或所提供的业绩证明文件无法验证前述业绩信息，均视为无效业绩。
B.Bidders shall submit valid？performance？statements？and relevant supporting documents (“1. Relevant chapters copies of contract”and“2. User's on-site commissioning report or user's？certificate ofuse”. If the？above item 1 and 2 can not prove the name and scale of ？LNG？receiving stations,the bidder shall provide other public document to prove thename and scale of？LNG receiving stations).The relevant？documentary evidence？must embody at least？the？following contents: the signing time of the？contract,？the name of the goods,the type of the goods (cryogenic butterfly valves), the name and scale of theunit (LNG receiving stations no less than 2 million tons per year ), the？quantity of goods supplied, the size and？class of valve. Failure to submit arelevant documentary evidence for their reference or？failure to verify the？above information will be regarded as invalid？performance.
C.投标人所报的本次招标低温蝶阀（包括阀门本体、主要部件）的原产地和制造商应与所提供业绩中的低温蝶阀（包括阀门本体、主要部件）原产地以及制造商一致，且所投本次招标低温蝶阀（包括阀门本体、主要部件）应在其原产地工厂进行生产和检验，不得委托加工。
C.The original place and manufacturer of cryogenic ball？valves(including the valve body and main component) of the bidder’s quotation？shall be in accord with the original place and manufacturer of the cryogenic？ball valves(including the valve body and main component) of the offered？performance. And the cryogenic ball valves(including the valve body and maincomponent) of the bidder’s quotation shall be manufactured and tested in theplant of the original place, OEM is forbidden.
4）质量要求：制造商应提供ISO9001质量管理体系认证证书，且证书在有效期内。代理商投标时应提供所代理的产品制造商的ISO证书。
Manufacturer shall have the ISO9001 quality management system？certification and the certificate is valid. The agent shall have the ISO？certificate of the product manufacturer.
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2020-05-07
招标文件领购结束时间:2020-05-14
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点：http://www.chinabidding.com/
招标文件售价:￥2000/$350
5、投标文件的递交
投标截止时间（开标时间）:2020-05-28 09:30
投标文件送达地点:北京市东城区东直门外小街6号海油大厦4层会议室
开标地点:北京市东城区东直门外小街6号海油大厦4层会议室
6、投标人在投标前应在必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。
7、联系方式
招标人:中海油江苏天然气有限责任公司
地址:中国江苏省南京市
联系人:曹伟军
联系方式:13852601591
招标代理机构:中化建国际招标有限责任公司
地址:北京市东城区东直门外小街6号海油大厦4层
联系人:王燕
联系方式:+86-10-84527979
8、汇款方式:
招标代理机构开户银行(人民币):
招标代理机构开户银行(美元):
账号(人民币):
账号(美元):