CNCCC International Tendering Co.,Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on2023-02-09
1、Bidding Conditions
Overview:Project Summary:The exploration and development operations of CNOOC (China) Co., Ltd. Hainan Branch are entering deepwater/ultra-deepwater areas, where the geological conditions are complex, the "high temperature and high pressure" and "Buried-hill fracture-cave" reservoirs are widely developed, the uncertainties in formation pressure prediction are becoming more and more prominent. Conventional drilling technology can't economically and effectively solve the drilling problems caused by the above difficulties, which leads to the frequent occurrence of complex situations such as well kicks, lost circulation and gas cut drilling fluids in the process of conventional drilling. At the same time, there are technical bottlenecks in drilling in reef limestone formation and salt & gypsum formation, which are difficult to deal with by using conventional drilling technology, resulting in long drilling operation duration, high well control risk and high operation cost, this brings high challenges to safe and efficient operation. In addition, conventional overbalanced pressure drilling technology has the disadvantage of difficulties in increasing drilling speed and poor reservoir protection, which is harmful to oil and gas discovery and significantly restricts the exploration and development of deepwater blocks. Therefore, it is urgent to apply new drilling technology and utilize new drilling equipment to achieve the purpose of safe and efficient development of deepwater/ultra-deepwater oil and gas blocks.thus the plan is to purchase two sets of advanced BTR RCD MPD systems globally and install them on deepwater drilling rigs to solve the current deepwater drilling problems.
Source of Funds:yes
Description of The Prepared Bidding Conditions:yes
2、Bidding Content
Bidding No:0704-2340JDCP0106
Project Name:2023-2026 BTR RCD MPD EQUIPMENT PURCHASE AND SERVICE
Place of Implementation:Haikou
List of Products:
| NO. | Product Name | Quantity | Main Technical Data | Remarks |
| 1 | BTR RCD MPD EQUIPMENT PURCHASE AND SERVICE | 2 sets | Two sets of Rotary Control Device Assembly, installed below tension ring and goose-neck on floating drilling rigs (Maximum outside diameter: < 60in; Minimum inside diameter: ≥ 18-3/4 in; Rated working pressure ≥ 2000psi; Tensile load rating ≥ 3.5MM lbs under pressure of 2000psi; Allowable water depth of installation ≥ 200ft;). 2 sets of Surface manifolds and control system(the inside diameter of connecting lines between manifolds shall be ≥ 5 in Pressure rating ≥ 2000psi). | For goods offered from within PRC customs territory:32 weeks after bid is awarded (time of SRT completion) For goods offered from outside PRC customs territory: 32 weeks after bid is awarded (time of SRT completion) For goods offered from within PRC customs territory: DDP the Buyer's warehouse (domestic goods), Laocheng District,Chengmai County, Hainan Province For goods offered from outside PRC customs territory: DAP at Machun Port,Haikou City, Hainan Province |
3、Qualification Requirements For Bidder
Qualifications or Performance:
A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
B. The manufacturer of the Bid Goods shall pass Quality Management System Certification ISO9001(or GB/T19001)Certification. Bidder shall provide valid Certificate of Quality Management System Certification of manufacturer. The surface manifolds and associated HPU installed on target rig A shall obtain ABS certification; The surface manifolds and associated HPU installed on target rig B shall obtain DNV certification.
C. The bidder shall be the manufacturer of bid goods. Bid by Agent is not accepted.
D.Joint Venture: Accepted,(The following requirements shall be met: each member of the Joint Venture shall authorize the leader of Joint Venture to participate in the bidding activities on behalf of the Joint Venture, sign documents, submit and receive relevant data, information and instructions, conduct contract negotiation activities, be responsible for the organization and coordination of the contract implementation stage, and handle all matters related to the bidding project. The leader of the Joint Venture shall purchase the bidding documents for the Joint Venture bidding.) The Joint Venture members registered within the customs territory of the People's Republic of China shall submit RMB, and the Joint Venture members registered outside the customs territory of the People's Republic of China shall submit USD. For the subsequent signing of the contract, the Joint Venture members registered in the customs territory of the People's Republic of China shall sign the RMB contract, and the Joint Venture members registered outside the customs territory of the People's Republic of China shall sign the USD contract. The Joint Venture must belong to the same group company. The Tenderer must submit the consortium agreement when bidding.
E.Bid without the bidding documents:NOT Available
(2)Requirement for Bidder's reference:
From January 1, 2017 to the deadline for submission of bids (subject to the time of signing the contract), the manufacturer of the products submitted by the bidder shall have at least 2 BTR RCD supply performance, and all meet the technical requirements of BTR RCD,include: maximum outside diameter < 60in, minimum inside diameter ≥ 18-3/4 in, rated working pressure ≥ 2000psi, tensile load rating ≥ 3.5MM lbs under pressure of 2000psi, allowable water depth of installation ≥ 200ft.
The Bidder shall furnish reference List in given form, and provide corresponding documentary evidence. The documentary evidence shall include but not limited to: 1) copies of sales contract (including technical appendix) and 2) Receiving certificate of arrival of goods. The reference evidence certification furnished by Bidder shall as least demonstrate the content show as follows: Date of signing contract, name of manufacturer, name of Goods, name of project, technical requirements of and all meet the technical requirements of BTR RCD, include: maximum outside diameter < 60in, minimum inside diameter ≥ 18-3/4 in, rated working pressure ≥ 2000psi, tensile load rating ≥ 3.5MM lbs under pressure of 2000psi, allowable water depth of installation ≥ 200ft. and receiving certificate of arrival of goods.
If no documentary evidence furnished, or documentary evidence furnished can not demonstrate Date of signing Contract, name of manufacturer, name of Goods, name of project, technical requirements of and all meet the technical requirements of BTR RCD, include: maximum outside diameter < 60in, minimum inside diameter ≥ 18-3/4 in, rated working pressure ≥ 2000psi, tensile load rating ≥ 3.5MM lbs under pressure of 2000psi, allowable water depth of installation ≥ 200ft. and receiving certificate of arrival of goods, the relevant reference will be deemed invalid.
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2023-01-19
Ending of Selling Bidding Documents:2023-02-02
Sell bidding？doc？online？or？not:No
To Obtain::On-site Purchase
Place:Please login at CNOOC Procurement Operation System (https://buy.cnooc.com.cn) on the page of Invitation for bid for purchasing Bidding Document
Price of Bidding Documents:￥200/$30
Additional Instructions:The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System (https://buy.cnooc.com.cn) on the page of Invitation for bid for purchasing Bidding Document from January 19th, 2023 to Febuary 2th, 2023. For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online.The bidder shall fill in the registration form for purchasing bidding documents online and pay online. After successful payment, the bidder can download the bidding documents by itself. The price of each set of bidding documents is RMB200 or USD30, and it is non refundable after sales. For the bidder who purchases the bidding documents in US dollars, it is required to wire transfer to the following account number:
Payee: CNCCC International Tendering Co., Ltd.
Bank:I NDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch:
Account:0200000709117000351;
SWIFT CODE: ICBKCNBJBJM,
Bank Address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, China PR,100006.
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2023-02-24 09:00
Place of Bid:Meeting room of Floor 4 CNOOC Tower, No.6 Dongzhimenwaixiaojie, Dongcheng District, Beijing100027, P. R. China
Place of Bid Opening:Meeting room of Floor 4 CNOOC Tower, No.6 Dongzhimenwaixiaojie, Dongcheng District, Beijing100027, P. R. China
6、The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
7、Contact Details
Purchasers:Cnooc China Limited
Add.:Rongcheng Bojun, No.6 Changbin 3rd Road, Xiuying District, Haikou, Hainan, P.R. China,？570311
Contact:Zhang Fangfang
Tel:86-898-69090977
Bidding Agency:CNCCC International Tendering Co.,Ltd.
Add.:Floor 4 CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District, Beijing100027, P. R. China
Contact:Mr. Chen Sicong
Tel:86-10-84525975
8、Remittance Approach:
Bank(RMB):
Bank(USD):
Account NO.(RMB):
Account NO.(USD):
