At the request of the Tenderee, the clarification to the Bidding Documents for the Intelligent Driving Robot Test System under Bidding No. 0679-264DFXYDA002 is given as follows:
1.The deadline for purchase of Bidding Documents is extended to: March 20, 2026.
2.Both the deadline for submission of bids and the bid opening time are revised to: 09:00 (Beijing Time), April 8, 2026.
3.Clause *13.3-3) under Clause 13.3, Table of Bidding Data, Chapter 6, Volume II of the Bidding Documents for International Tendering of Mechanical and Electrical Products is revised to:
The tender requires that bidders must have at least one supply performance of a similar intelligent driving robot test system in the recent three years (from January 1, 2023 to the bid opening date of this project; the performance confirmation date shall be subject to the contract signing date). Bidders may provide their own performance or the performance of the manufacturer they represent. Copies or screenshots of the corresponding contracts and other supporting documents for the performance shall be provided in the bidding document during bidding. If the contract documents cannot reflect the specific characteristics of the above project, relevant supplementary supporting documents such as technical agreements shall be provided.(This clarification shall prevail.)
All other contents of the Bidding Documents remain unchanged.
Hereby notified.
Dongfeng International Tendering Co., Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on2026-03-13
1、Bidding Conditions
Overview:Intelligent Driving Robot Testing System 1 set
Source of Funds:Have been secured
Description of The Prepared Bidding Conditions:Have been met
2、Bidding Content
Bidding No:0679-264DFXYDA002
Project Name:Intelligent Driving Robot Testing System
Place of Implementation:Xiangyang City, Hubei Province, China
List of Products:
| NO. | Product Name | Quantity | Main Technical Data | Remarks |
| 1 | Intelligent Driving Robot Testing System | 1 set | The rapid development of automotive intelligence has led to a surge in R&D and testing demands for intelligent functions such as AEB, NOA, and DSSAD. Meanwhile, a batch of national standards in the intelligent connected vehicle sector has been released. Among them, the mandatory standard for DSSAD and the standards for single-lane and multi-lane functions (which are to be referenced in the access approval for combined driving assistance) have been officially issued. At the same time, the formulation of mandatory AEB standards for light-duty vehicles and heavy-duty vehicles is being accelerated. In international standards and regulations such as EU regulations and ENCAP, the proportion of intelligent-related content is increasing rapidly, driving a fast growth in relevant R&D and testing demands. Major testing institutions in the industry have successively launched response layouts, expanding the number of testing lines to seize market share. With the development of the industry and technology, the current number of equipment and some performance parameters have faced issues such as insufficient testing capacity and failure to meet new technical indicators. There is an urgent need to purchase new equipment to meet the future product R&D and verification needs both within and outside the group. |
3、Qualification Requirements For Bidder
Qualifications or Performance:* Performance Requirements: The tender requires that bidders must have at least one supply performance of a similar intelligent driving robot test system in the recent three years (from January 1, 2023 to the bid opening date of this project; the performance confirmation date shall be subject to the contract signing date). Bidders may provide their own performance or the performance of the manufacturer they represent.
Copies or screenshots of the corresponding contracts and other supporting documents for the performance shall be provided in the bidding document during bidding. If the contract documents cannot reflect the specific characteristics of the above project, relevant supplementary supporting documents such as technical agreements shall be provided.
*Other qualification documents required to be provided by theder for this tender:
1. Creditworthiness Requirements:
Bidders falling under any of the following circumstances shall be ineligible to participate in this tender (Bidders must provide webpage screenshots or written declarations as proof. The bid evaluation committee will verify the authenticity during evaluation. If discrepancies are found between the submitted documents and the verification results, the committee’s on-site check shall prevail):
(1) Listed in the National Enterprise Credit Information Publicity System (https://www.gsxt.gov.cn) as Seriously Dishonest Entities or Abnormal Business Operations.
(2) Listed on Credit China (https://www.creditchina.gov.cn) as Discredited Persons Subject to Enforcement, Serious Tax Violation Dishonest Entities, or Entities Subject to Joint Punishment for Wage Arrears to Migrant Workers.
(3) Included in the "Government Procurement Serious Dishonesty Records" published on the China Government Procurement Website (http://www.ccgp.gov.cn).
(4) Included in the "Military Procurement Dishonesty List" or "Military Procurement Suspension List" published on the Military Procurement Website (https://www.plap.mil.cn).
(5) Currently on the Dongfeng Motor Corporation Blacklist within the validity period, or having affiliations with entities blacklisted by Dongfeng Motor Corporation.
(6) Published on the "Counterfeit State-Owned Enterprises List" by superior authorities.
2. Qualification Requirements:
2.1 Bidders may be either the manufacturers of the main equipment (robots) for this procurement or the agents. When participating as an agent, a bidder shall provide the manufacturer’s authorization letter.
2.2 The Bidder shall hold the ISO 9001 (GB/T 19001) Quality Management System Certification.Copies of the relevant certificate shall be provided in the bidding document.(In the case of an agent, the certificate of the manufacturer of the product it represents may be provided.)
3. Other Requirements: The bidder must provide a credit commitment letter in the bidding documents.
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2026-03-04
Ending of Selling Bidding Documents:2026-03-20
Sell bidding doc online or not:No
To Obtain::On-site Purchase
Place:Room 303,3F, Xiangyang administration building, 11 Dongfeng Motor Road, Xiangyang hi-tech industrial development zone, Hubei Dongfeng Motor
Price of Bidding Documents:￥800/$120
Additional Instructions:/
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2026-04-08 09:00
Place of Bid:Bid Evaluation Room 1, Xiangyang Trading Center of Dongfeng Automobile Procurement Bidding & Tendering Trading Platform1st Floor, R&D Building, Dongfeng Automobile Nano Technology (Xiangyang) Co., Ltd.Beit 1, Dongfeng Automobile Avenue, High-Tech Industrial Development ZoneXiangyang City, Hubei Province, P.R. China.
Place of Bid Opening:Bid Evaluation Room 1, Xiangyang Trading Center of Dongfeng Automobile Procurement Bidding & Tendering Trading Platform1st Floor, R&D Building, Dongfeng Automobile Nano Technology (Xiangyang) Co., Ltd.Beit 1, Dongfeng Automobile Avenue, High-Tech Industrial Development ZoneXiangyang City, Hubei Province, P.R. China.
6、Contact Details
Purchasers:wuhan daan technology Co. Ltd.
Add.:R&D Building R, Artificial Intelligence Science and Technology Park, Wuhan Economic and Technological Development Zone, Hubei Province, China.
Contact:Mr. Wang
Tel:0086-710-3390828
Bidding Agency:Dongfeng International Tendering Co., Ltd.
Add.:No.11 Dongfeng Road, High-New-Tech Develoament Zone, Xiangyang, Hubei Province, China.
Contact:Zhang Ronghui
Tel:13986159738、18772213737
7、Remittance Approach:
Bank(RMB):/
Bank(USD):/
Account NO.(RMB):
Account NO.(USD):
Additional:The remittance method is detailed in the other supplementary attachment.
8、Additional Instruction
Attachments:招标公告-补充说明20260304.docx
